Fireluke is a unique bubble style and multi-function tank with a beautiful glassbowl tube from Freemax. It has a 0.15ohm DVC sub ohm coil and can also be easily transformed to a RTA with the Firelock RTA section.Together with an extra fashionable glass tube, you can change its e-liquid capacity from 5ml to 4ml. With large adjustable bottom airflow, the Fireluke tank will bring you huge vapor with nice flavor. Get one Fireluke tank to enjoy a completely different vaping experience. Standard Edition and Resin Edition to choose from.
58.4 (L) mm x 31.7 (D) mm(5ml)
58.4 (L) mm x 28.6 (D) mm(4ml)
Coil: 0.15ohm DVC coil (pre-installed)
Material : Stainless Steel & Resin
Standard Edition: Black, SS
Resin Edition: Black, Blue, Green, Purple, Red, Yellow
Thread: 510 thread
It comes with
Fashionable bubble style and Colorful style tank
4ml & 5ml e-liquid capacity
One kit variable for 2 atomizers – RTA & Subohm tank
Easily transform to sub-ohm atomizers
Big Velocity style deck for easy and quick build
Single or dual coil rebuild for option
Large adjustable bottom airflow for massive clouds and excellent taste
Organic Japanese cotton coil
A: Using as an RTA
1. Break down the atomizer and loosen the screws with the hex wrench.
2. Place the first coil into the post holes.
3. Secure the coil in place and blend the excess wire outwards.
4. Do the same with the second coil on the other side. (You can also choose to use single coil with the stopper.)
5. Tighten down the screws and make sure they’re nicely secured.
6. Snip off the excess wire.
7. Straighten out the coils and make sure they’re not touching the deck.
8. Attach the atomizer base into your battery mod and press the fire button to heat the coil up to red. (Please wait until it cools down to avoid scorching. )
9. After the coil cools down, tear down a piece of pure cotton and place it into the coil carefully.
10. Trim the cotton tight to the deck and push it back inside.
11. Drip a few drops of e-liquids into the cotton to get it fully soaked and left it sit for a while.
12. Install the chamber and screw the atomizer base back on.
B: Using as a sub-ohm atomizer
1. Break down the atomizer, unscrew the RTA Section and replace with the 0.15ohm coil head.
2. Drip a few drops of e-liquid into the head.
3. Screw the extended vent pipe onto the top cap.
4. Put the glass tube on and install the whole atomizer.
E-liquid filling for sub-ohm atomizers:
1. Aimed at the sign on top, unscrew the top cap to reveal the filling holes.
2. Inject the e-liquid into the holes on both sides and close the top cap.
3. Rotate the bottom airflow and inhale for a few times without pressing the fire button.
4. Press the fire button and enjoy the flavor.
|Dimensions||22 × 20 × 15 cm|
Green, Purple, Red
These products are intended for sale to adults 18 years or older. If you are not 18 or older, please do not enter the site.