Innokin Endura T18 is a perfect vaping device with optimized power output and amazing flavor & vapor. Long lasting, easy to charge 1000mAh battery with built in overheat & safety protections. Easy to top-fill 2.5ml tank made with top quality stainless steel & pyrex glass! Simply fill with your favorite e-liquid, click the button and get ready for a Great Vape!
Endura T18Size: 18mm (D) x 84mm (H)
Battery: 1000mAh, 7C continually
Standby current: 10 uA max
Maximum output Wattage: 14W
Maximum output Current: 3.5A
Maximum output Voltage: 5.5V
Clearomizer Resistance: 1.2 – 2.5ohm
Charging: Micro USB DC5V/1A
Prism T18 Tank
Size: 18mm (D) x 64mm (H)
It comes with
- 1 x Endura 1000mAh battery
- 1 x 2.5ml Prism Tank (with coil)
- 1 x Extra coil
- 1 x USB cable
- 1 x Plastic Endura stand
- 4 x O-rings
- 2 x Mouthpiece
Optimized Power Output (14W)
overheat & Safety Protections
Top-Fill 2.5ml Tank
3 click on/off lock
15-second auto cutoff mechanism
Charging short circuit protection
Over discharge protection
Atomizer short circuit protection
Short circuit protection
Over charge protection
How to refill the Tank
1. Carefully unscrew the top cap from the Tank.
2. Add e-Liquid against the inside wall of the Tank.
Important: After refilling, please wait 5 minutes before vaping.
Replace a coil
1. Hold the Tank with the threading up.
2. Unscrew the bottom Metal cap of the Tank
3. Hold the coil and gently pull to remove.
4. Carefully and safely dispose of the used coil. Keep away from children and pets.
5. Properly align the flat sides of the new coil.
6. Push to fully insert the new coil firmly into Tank.
7. Ensure that the coil is completely inserted.
8. Carefully and firmly tighten the metal cap.
Caution: Make sure there is no e-liquid in the tank before you pull out the coil
- It doesn’t come with liquids, you shall buy separately.
- Your can purchase the 5pcs Innokin Prism Replacement Coil for T18/T22.