SMOK Trophy Tank V2 Bottom Coil Pyrex Glass Atomizer – 5ml
IncludingStainless Mouthpiece1pcUpper Ring
Pyrex Glass tube1pcBottom Ring
Replacement atomizer heads, 1.8ohm (1 installed )
ParameterResistance1.8 +/- 0.2ohmLength
How to use?
1. Turn upside down the cartomizer, then screw off the connector.
2. Use the syringer or dropper to fill less than 5ml e-liquid. Do not overfill it.
3. Allow 1-2 minutes for the e-liquid to feed into the coil before you start to vaping. Or Give the cartomizer a quick shake.
4. Carefully screw on the connector, connect it with the battery and enjoy it.
How to replace the coil unit/coil head?
Turn upside down the cartomizer, then screw off the base. Take out the old coil unit from the bottom base, replace with new one. So easy!
How to remove your BCC cartomizer from battery?
Hold the bottom of the clear cartomizer when you separate it from battery. Please do not screw the cartomizer from the top or middle of the cartomizer, just in case the e-liquid pour out.
|Dimensions||10 × 5 × 5 cm|
These products are intended for sale to adults 18 years or older. If you are not 18 or older, please do not enter the site.